WTN Wireless Timing Network
WTN is a worldwide unique wireless timing network with mesh topology. It can transfer timing information as well as serial data and display board information simultaneous. All devices act as transceivers, so no separate transmitters and receivers are necessary. Redundancy: The more devices you use, the more reliable it gets.
Battery
-
3x BAA1.5/1
Device
-
1x WTN-F
FAQ
You have different software versions of the WTN Firmware on the TIMY3 W and on the other partner devices in the same team. Please check first if you have the most current Timy Firmware. Then please update the other WTN devices with "RF Update" which you find under menu->WTN->Settings->RF Update. See also the manual for this issue.
Maybe you have enabled the hardware handshake on the RS232, but no RS232 cable connected. Please disable this setting. Go to menu->interface->RS-232->handshake: Choose "NO RTS-CTS". This unwanted "automatic-enable" of Hardware Handshake should be solved with V18.22.
Downloads
Alpine Skiing - Ski School
English (PNG, 216 KB) Deutsch (PNG, 215 KB)Autocross - Sprint
English (PNG, 421 KB) Deutsch (PNG, 421 KB)WTN
The PC Software to perform the update you can find here: Install-Manager (RS232) or TIMY3 (Radio)
Available languages:
English
23.33 See changes