History file for Time Manager Swim

V 16.B1  2016-11-17

    "The ready LED of start unit 2 flashes in the state stop"
         This has been removed now.

    "Crash after calling the 'DBG' command"
         Fixed infinite loop on output of the voltage values to the serial interface, when the UART FIFO is free.

    "Response times or transfer times could be disturbed by the other side"
         Times of touch pad and start socket now check whether they came from the same swimming pool side.
         At the start, start socket times are checked whether they are raised also on the start side.

    "Maximum number of stored touch pad levels increased"
         Increased the number of stored touch pad levels has been reached by reducing memory consumption of a time element

    "Pushbuttons times were not send to the PC in the state stop"
         The times of pushbuttons are now valid tagged and redirected with touch pad number provided on the PC.

V 15.91  2015-09-15

    "Times will be provided faster from the video interface"
         Query the terminals are organized differently.
         Removed 10kHz and 1kHz interrupt.

    "A start uses the word 'start' announced on the video interface"

    "Several start reaction time were allocated to the lanes"
         Missing storage of last reaction time during the duration of the starting block window of the respective lane, added.
         The parts of the program to the reaction time measurement is redesigned.
         
    "Beside edges have been accepted as a source of impulse"
         Eleminate the bug in the two edges query.              

    "Race with odd numbers of touches now possible"
         Auto-correction is not activated when racing with an odd number of touches.

    "Command 'EBT' for lane '0' does not work"
         In the command expiration check was lane '0' blocks.

    "A counting direction was with lane '0' selected, the scoreboards assignment to the lanes no longer agreed"
         The issue of times on the scoreboards is now checked, whether the lane '0' is included.

    "Extension of the command 'DIS#'"
        'DIS0' -> All scoreboards are switched off. 'DTG' data continues to be displayed.
        'DIS1' -> The scoreboards are switched on.
         
    "Extension of the command 'SGM#####mssnr'"
        'SGM#####mssn0' -> Start reaction times as well as relay takeover times are displayed.
        'SGM#####mssn1' -> Only start reaction times appear on the display panels.
        'SGM#####mssn2' -> No response times are shown on the scoreboards.


V 14.21  2014-02-20
    
    "Add the New command 'BUZ#'"
        'BUZ0' -> Switch off the internal loudspeaker.
        'BUZ1' -> Only a valid touch pad impulse creates a sound on internal loudspeaker.
        'BUZ2' -> Switch on the internal loudspeaker, each impulse create a sound.
    
    "Overstepped the maximum count of touches"
        The automatic touch correction is disable now on the second last touch.
        
    "Registering of start impulses not more delimited"
        Abrogate the five second start impulse registering limit. Start impulses afterwards become registered as invalid impulses.                  

    "After send the 'REC' command, no other command work any more"
        Disconnected the PC blockade trough RTS-wire after the 'REC' command