History file for TED2

V 24.51  2024-05-08
    OS Update
    Bugfix: Don't switch off display, if external power is supplied
    Command to enter bib via USB
    Configurable bib suggestion

V 24.21  2024-02-15
	Improved the manipulation and displaying of the channel state
	Extended and corrected the protocol printing
	Fixed wrong pulse hold message when synchronizing manually
	

V 24.12  2024-01-31
    If a printer is connected, setting changes and synchronisation are logged
    Fixed to handle deleted triggers when switching on the TED2
    Setting the radio channel in the radio module is more robust
	Show state during executing "send memory" menu
	Corrected typo in synchronize menu
	Added more features when deleting a trigger
	Adapted the sequence of printing trigger with RSM command to fulfill skiing regulations

V 23.B1  2023-11-10
    Don't turf off display when device is powered
    Optimized GPS initialization at start up
    Optimized gps synchronization and calibration
    Menu entry to print all stored triggers

V 23.A2  2023-10-05
    Bugfix with command responses (like NSF?, DEVINFO?,..). Bug was only in V23.A1

V 23.A1  2023-10-04
    Nested trigger transmission for speed measurement
    Enter a SYNM sync time via menu
    Report entered bib via USB (only RX)
    Bugfix in USB host connection when using a P6 with external power supply
    Improve GPS icon on longer GPS module startup time
    Improve battery icon

V 23.92  2023-09-26
    Sync time: handling improved,bug fixed, partially codereview done

V 23.91  2023-09-15
    Sync time can be enteres manually by menu

V 23.83 2023-08-30
    Bugfix: battery icon wasn't painted on each entering of main screen

V 23.82 2023-08-30
    STN* feature for main screen and scroll mode
    Fast trigger transmission at high tx power fixed
    STD command set tx power and channel to default
    New commands: RSSI?, RFCHANNEL?, RFCHANNEL:XXX, TXPOWER?, TXPOWER:X

V 23.73 2023-07-25
    Bugfix on outputting triggers on RS232
    Additional monitoring of GPS interface
    Bugfix: trigger received via radio weren't printed

V 23.72 2023-07-18
    Increase the field test priority (interrupts data transmission and all screens)
    Bugfix in memo mode: actualized trigger weren't removed from the list
    Bugfix: Battery wasn't charged under specific circumstances
    Bugfix: Via radio received trigger weren't printed on P6 at RX
    Bugfix: If no usb was connected, no trigger were printed on RS232
    Bugfix: Missing resends at TX fixed
    STD clears all trigges. synchronization will only be reset if it wasn't yet GPS

V 23.71 2023-07-11
    Bugfix on charging battery

V 23.63 2023-06-16
    Bugfix in usb device connection
    Bugfix in P6 support

V 23.62 2023-06-16
    Bugfixing and improving the usb connectivity for device and host
    External power detection for P6 printer
    RSM command: ordering of trigger corrected
    support field test during data transmission
    bugfixes of data transmission for special cases

V 23.61 2023-06-14
    A field test has top priority in radio transmission
    Serial data and resends of triggers are interrupted by the field test
    The ESC key is deactivated during the trigger reset
    Bugfix: Return of the resend menu to the info state after the end of the switch-off window
    Bugfix that the last SystemState switching command was not completely transmitted at the end of the field test
    Bugfix that the last SystemState switch command at the end of the field test was not transmitted due to an already occupied DMA process

V 23.51 2023-05-25 (test version for Rev4)
    Smoothing of the operating voltage by weighting the old measured value and the new voltage measurement.
    Radio frequency, memory consumption of triggers and transmitter power are new in the Info Display
    Bugfix that wrong characters were shown in the Info Display
    Bugfix that the serial number was not shown in the Info display
    Command to set the minimum trigger length
    Radio module in the transmitter is no longer set to power saving mode after power on
    Bugfix that it was no longer possible to scroll in the channel settings menu
    Triggers can be printed on the printer
    Serial interface is configured according to the device type
    Bugfix that parts of the menu cursor are deleted
    Menu entry TED1 Mode renamed to TED-RX
    Table of resend times corrected
    Bugfix at USB OTG feature
    VBus is switched off at an operating voltage of less than 3.6 V
    Continuous VCC measurement at intervals of approx. 156 mSec
    RSSI measurement at intervals of 4 mSec and averaged during the transmission process
    CC module now reports changes via interrupt
    The last deviation is now also available when the GPS is asleep.
    Logging must now be explicitly activated
    Sync status and device type removed from the Info Display

V 23.41 2023-04-17
    TED1 compatibility mode
    Bugfix: corrected the VCC value in the system state
    Bugfix: receiver checks all received data additionally
    support P6 printer via USB
    Improvements in USB host and device support

V 23.31 2023-03-29
    Bugfix in USB handling
    Show empty TX battery at RX
    Adapted the default settings
    Optimized the RSSI measurement
    Accept all trigger resends after ClearMemory
    Corrected the baudrates at automatic baudrate selection
    activate watchdog
    Improved the scroll mode
  
V 23.22 2023-02-14
    EMV Test: Maximum output power (500mW)

V 23.22 2023-02-07
    EMV Test: Bugfix in stop sending system states
    EMV Test: display GPS info

V 23.21 2023-02-07
    Bugfix in trigger transmission when trigger occured simultaneously
    Automatic baudrate switching
    Receiver must be synchronized to physically trigger a received trigger
    EMV Test: turn fieldstrength test on/off

V 23.11 2023-01-31
    Initial version for TED2 Ref.2